QUICK START
Use this guide to go from unboxing to your first successful Pick and Pack demo.
Note: Wi-Fi is not required to run the Pick and Pack demo workflows.
Get started in 10 minutes
Step 1: Unbox the kit - Confirm that you have the device, accessories, and printed materials.
Step 2: Power on the device - Put on the glasses and power them on.
Step 3: Complete device setup - Follow the prompts for initial device setup and basic navigation.
Step 4: Launch Mobilium - From the main menu, open the bundled Mobilium demo application.
Step 5: Choose a workflow - Select a workflow from the Mobilium home screen. Best first demo: Pick Assist.
Step 6: Open the flipbook - Go to the correct page range for your selected workflow and scan the pages in order.
Step 7: Complete the workflow - When the workflow is finished, it automatically returns to the main menu so you can start another demo.
Recommended first-run path
Start with Pick Assist
Then try Goods Receipt or Bin Audit
Save Pack Assist and Pallet Build for later runs
FLIPBOOK GUIDE
The flipbook is the barcode guide used to drive each demo workflow.
The flipbook-driven demo workflows do not require Wi-Fi connectivity.
How the flipbook works
Each workflow uses a specific range of pages in the booklet.
Scan the barcode pages in sequence and follow the prompts shown in the glasses display.
The flipbook simulates operational scans so users can experience the workflow logic without live warehouse labels, bins, cartons, or product.
Workflow page ranges
Pick Assist: pages 4-6
Goods Receipt: pages 7-11
Pack Assist: pages 12-16
Pallet Build: pages 17-20
Bin Audit: pages 21-27
How to use it
Open Mobilium
Select a workflow
Open the flipbook to that workflow’s pages
Scan the pages in order
Follow the on-screen guidance
Complete the workflow and allow it to return to the main menu automatically
Tips for best results
Hold each page steady
Keep the barcode fully visible
Use good lighting
Follow the page instructions in order
Restart from the first page if needed
DEMO WORKFLOWS
Each workflow is designed to demonstrate a different warehouse use case.
Pick Assist
What it shows: Guided picking with location and item confirmation.
Flipbook pages: 4-6
What to expect: Scan the location and item on each page to move through the pick task. When complete, the workflow returns to the main menu.
Why it matters: Shows how guided picking can support consistent execution and help reduce picking errors.
Goods Receipt
What it shows: PO-based receiving with normal receiving and expired-item handling.
Flipbook pages: 7-11
What to expect: Run one standalone receiving sequence for accepted cases and one standalone receiving sequence that triggers expired-item handling. When each sequence is complete, the workflow returns to the main menu.
Why it matters: Shows how a receiving workflow can guide inbound verification and surface exceptions.
Pack Assist
What it shows: Guided packing with order/carton loading and item verification.
Flipbook pages: 12-16
What to expect: Scan the order/carton page first, then scan the item pages in sequence. When complete, the workflow returns to the main menu.
Why it matters: Shows how guided packing can support accuracy and process consistency.
Pallet Build
What it shows: Guided case-to-pallet assignment for outbound staging.
Flipbook pages: 17-20
What to expect: Scan the case pages and follow the pallet assignment shown in the display. One sequence demonstrates wrong-case handling. When complete, the workflow returns to the main menu.
Why it matters: Shows how workers can be guided to the correct pallet destination during outbound handling.
Bin Audit
What it shows: Guided bin verification with mismatch detection.
Flipbook pages: 21-27
What to expect: Scan bin and item pages in sequence. One sequence demonstrates a mismatch and follow-up action. When complete, the workflow returns to the main menu.
Why it matters: Shows how guided audit workflows can support inventory verification and exception detection.
TROUBLESHOOTING
Use the steps below if a workflow does not behave as expected.
Barcode will not scan
Hold the page steady
Improve lighting
Move slightly closer or farther away
Make sure the full barcode is visible
Retry the scan from a stable position
Wrong workflow opened
Return to the main menu and start the correct workflow.
Then open the matching page range in the flipbook.
Flipbook sequence seems off
Go back to the first page for that workflow and restart the sequence.
Device is not connected to Wi-Fi
Wi-Fi is not required to run the Pick and Pack demo workflows.
If you are only running the demo, you can continue without connecting to a network.
App will not launch
Return to the main menu and relaunch the bundled app.
Device does not return to the main menu after a workflow
If the workflow does not return to the main menu as expected, exit the current screen or relaunch the app before starting the next demo.
Display is hard to see
Reposition the device for a more comfortable view, then restart the demo.
Battery is low
Charge the device before running another workflow.
RESET THE KIT
Use these steps to prepare the kit for the next user.
Standard reset steps
Complete or exit the current workflow
Confirm the app is back at the main menu
Relaunch the app if needed
Return the flipbook to the beginning or index
Confirm the battery level
Confirm the next workflow to run
Ready-for-next-user checklist
The device is powered on
Mobilium is at the main menu
The flipbook is reset
The charger is available
The next user knows which pages to open
Restart the device if needed
The app becomes unresponsive
Scans stop behaving normally
The device remains in an unexpected state after completing or exiting a workflow
Goal
Each new user should be able to start with a clean, first-run experience.